Site Map
WE CATER TO CONTRACTORS!
Phone:
Fax:
800-756-8077
800-756-9077
MADE IN THE USA!
Great Products! Great Prices! Great Service!
Since 1960

Wood Face Frames

Maple Craft USA is pleased to announce it's Custom Face Frame Program!

Now you can order Custom Face Frames with the assurance of Maple Craft USA’s excellent service, as well as the confidence of receiving the same quality that you have grown to expect from the leader of the wood components industry.

Wood Species
Choose from wood species in Red Oak, Hard Maple, Cherry, Soft Maple, White Birch, Red Birch, White Oak Hickory, Pine, Walnut or Mahogany.

Face Frame Design
You have a choice of 9 custom face frame designs. Or you have the option of creating your own by submitting a drawing. Our shop guys are waiting for the challenge of what you dream up!

Nine Custom Face Frame Designs
(illustrated to the left)

Dimensions:

Stiles and Rails Standard: 1 1/2” x 3/4”

Center Horizontals and Verticals: 1 1/2” x 3/4”

Custom Dimensions: 1”, 1 3/4”, 2”, 2 1/2”, 3”,

3 1/2”, 4”, 4 1/2”, 5”, 5 1/2”, 6”

Specifications:

Assembly Method: 2 screws per joint on the backside of the frame.

Sanding: 180 grit with removal of crossgrain.

Tolerances: +/- 1/32”

Face and Sides: Color Matched

Backs: Sound (color allowed)

All standard width frame parts are solid / non-glued up pieces.

Method of Assembly
We assemble our frames with 2 screws. When we rout the back of the frame (Option #2 shown below) we only use one screw. The screws are placed into a premachined pocket on the back of the frame. Sanding is done to 180 grit with all cross grain removed. Tolerances are +/- 1/32”. Face and sides are color matched, while on the backs we allow some color. All standard width frame parts are solid / non-glued up pieces.
Method of Assembly

Back Side View showing the Assembly Method

One to two screws are applied at an angle into prerouted oval shaped holes on the vertical stiles.

The screws are 1 1/4" long and attach the verticle stiles to the horizontal rails.

This is the most secure and most common methods of assembling face frames.

Profile Options
You can choose between these profiles: Option #1 with a squared frame 1-1/2” x 3/4” or Option #2 (which has the same dimensions) with the back grooved to receive a 1/2” carcass of the horizontal and vertical gables of the cabinet.
Face Frame Profiles
(illustrated to the left)

Note: All grooved face frames will have grooves on the outside of the frame on the verticles, as well as to the top of the horizontals.

You Can Choose . . .
As a cabinet maker of the New Millennium, you should have the chance to choose the Wood Species, the Design, the Widths, and the Profiles that best suit your cabinet construction needs. We are always willing to accommodate you on other ideas, or other needs that you may have. We are sensitive to the needs of our customers. If you can dream it — we can do it!

How To Order:

1) Complete the Face Frame Order/Quote Form with the information below and fax it to us at 800-756-9077.

2) Determine outside dimensions of your face frames. Draw them out on paper.

3) Choose your Wood Species. Choose from the 24 listed there.

4) Choose your Face Frame Design (shown above). Submit drawings on nonstandard designs.

5) Choose a Face Frame Profile: Option #1 is Square, Option #2 is Grooved.

Contact us today! You will be glad you did!

Maple Craft USA • P.O. Box 26 • Albion, Pa 16401
Local Phone: (814) 756-4997 • Local Fax: (814) 756-5640