Site Map
WE CATER TO CONTRACTORS!
Phone:
Fax:
800-756-8077
800-756-9077
MADE IN THE USA!
Great Products! Great Prices! Great Service!
Since 1960

Special Options

Below are many custom options available to enhance your order. Options include: Bloom Framed Cabinetry hinges, hinge boring, frame-only and Mullion door options, and preparation for glass inserts.
Cabinet HInge Options
Hinges with Integrated Soft Close
1/2" Overlay HInge
Blum COMPACT BLUMOTION 38N
105º opening angle
1-1/4" Overlay HInge
Blum COMPACT BLUMOTION 39C 110º opening angle
  • Soft close feature is now incorporated within each hinge!
  • Steel, nickel plated concealed hinges
  • Hinges packed in pairs with mounting screws
  • Hinge option is only available on door styles and edge profiles which support concealed hinge boring
  • Doors over 42"H will receive 3 hinges
  • Specify hinging left or right for single door cabinets
  • Available with 1/2 and 1-1/4" overlays
  • All hinges feature side, height and depth adjustment for fine-tuning door spacing with wraparound face frame mounting for ease of installation
  • Blum COMPACT hinges require pattern "A" cup boring
  • When 1-1/4" overlay is ordered, extended stiles or loose filler strips may be required in applications where cabinets are installed next to a tall cabinet, corner cabinet or a wall
  • Hinges available in pairs or bulk pack (50 hinges per pack, including mounting screws)
Blum Specialty Hinges
170º Hinges
  • Provides full access to cabinet interiors with 170º opening angle
  • Available with 1/2" overlay only. Will not work with inset door applications
  • In 1-1/4" overlay applications, cabinets will have their doors sized as 1/2" overlay in width only
  • Two-piece clip style hinge with side, height and depth adjustment points
  • 170º corner hinges require Pattern "B" cup only boring
  • Blumation soft close feature is not available
  • Standard on WCP and BLS cabinets
Blum 71T6550 Hinge
Blum 175H6000 mounting plate
Concealed Inset Hinges
Blum 71T5650 hinge - Blum 175H5030.21 mounting plate
  • hinge and mounting plate system for concealed inset applications with framed cabinetry
  • 120º opening angle
  • hinge packs include screws and two adjustable door stops with bumpers
  • concealed inset hinges require Pattern "B" cup only boring
  • special hinges for 1-inch thick doors and front frames are supplied automatically on BEAL/R, BSC, BCFD, TCH, WCS, WCD and WCA cabinets
  • special hinges are also supplied automatically when 1-inch thick front frames and prefit doors are ordered on any cabinet
  • door and front frame thickness must match. Cabinet with 1-inch thick front frames will receive 1-inch thick doors
Hinge Boring Options
We offer to prepare your cabinet doors for the following hinge applications: Concealed Hinge Boring, Soss Hinge Boring, and Knife Hinge Slots.
Concealed Hinge Boring: Pattern "A" 2.5mm
Recommended for Face Frame Cabinet Applications
  • When ordering specify: Boring Pattern "A", and specify with our without insert holes.
  • Boring consists of a 35 mm diameter hole, 13.5 mm deep with a 2.5 mm tab dimension from the edge of the door.
  • Insert holes are 8mm diameter hole, 13.5mm deep with a 2.5mm tab dimension from the edge of the door.
  • Distance between insert bores is 45mm.
  • Doors 9" - 42" long receive two bores.
  • Doors 42-1/16" - 72" receive three bores with one hole centered.
  • Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
  • Boring available on the following edge profiles only: B-2, LC-Inset, L-O59, LC-2, L-149, PRS-2, Machine Edge and V-2.
    Not available with rabbeted or partial inset edge profiles.
  • Pattern "A" accommodates the "screw-in versions" of the following manufacturers' hinge models:
    • Blum:Compact 33
    • Grass:Tech, 300 and 3000 Series
    • Amerock: CM2042
    • Mepla: ACC162 (screw in version)
    • Salice: "S" Series
    • Hettich: TB and Optimat TB Series
Concealed Hinge Boring: Pattern "B" 5mm
Recommended for Frameless / 32mm Cabinet Applications
  • When ordering specify: Boring: Pattern "B" and specify with our without insert holes.
  • Boring consists of a 35 mm diameter hole, 13.5 mm deep with a 5mm tab dimension from the edge of the door.
  • Insert holes are 8mm diameter hole, 13.5mm deep with a 2.5mm tab dimension from the edge of the door.
  • Distance between insert bores is 45mm.
  • Doors 9" - 42" long receive two bores.
  • Doors 42-1/16" - 72" receive three bores with one hole centered.
  • Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
  • Boring available on the following edge profiles only: B-2, LC-Inset, L-O59, LC-2, L-149, PRS-2, Machine Edge and V-2.
    Not available with rabbeted or partial inset edge profiles.
  • Pattern "B" accommodates the "screw-in version" of the following manufacturers' hinge models:
    • Blum: 107, 120, 120+, 170, Diagonal 20, 30, 37, 45
    • Angle 25 and Clip Top Series
    • Grass:Tech, 300 and 3000 Series
    • Amerock: CM2042
    • Salice: 200 Series (use 2mm mounting plate)
Soss Hinge Boring
  • Commonly used on Lazy Susan doors.
  • The routs are placed 9" off center, measured from the vertical center of the door to start of the rout.
  • Not available on doors over 42" high or under 25-1/8" high.
Knife HInge Slot
  • Knife hinge slot is 9/32" wide, 37/64" deep and 1-34" long.
  • Placement is 3" from the edge of the door to the center of slot.
  • Doors 9" - 35-15/16" receive 2 slots.
  • Doors 36" - 51-15/16" receive 3 slots with one centered.
  • Doors 52" and greater receive 4 hinges with center slots set 25" in from each end.
  • Knife hinge slot is not available on framing less than 2-5/16" width. Cut down framing option is not available.
  • Knife hinge slot will accommodate the following hinges:
    • Youngdale #5 and #6 hinges
    • Amerock #2603, #2605 and #2606 hinges
  • Hinge slot available will the following edge profiles only:
    • B-2, C-2, E-2, J-2,H-2,LC-Inset,LC-2, L-149, Machine Edge, PRS-2and V-2.
  • Not available with rabbeted or partial inset edge profiles.
  • Knife hinge slot is not available with frame only or mullion designs, doors under 9", Batten designs, CRP-10605 and CRP-10446.

Frame Only and Mullion Doors
We offer a wide variety of frame-only and mullion configurations and options. The illustrations below are only a representation of available patterns. Contact our office if your requirements are not shown below.

Standard Frame Only and Mullion Doors come in Regular, Ogee, Square and Special Bead Mullions and are fitted for one piece of glass per door. This is standard unless otherwise specified.

True Divided Lites can be done in Regular, Ogee, Square, and Special Mullions. These doors are fitted for individual glass per lite. These doors have 7/8" wide mullions unless otherwise specified. Glass retainer moulding is not available. Specify "True Divided Lites" when odering.

Retainer Moulding Options
Glass Moulding Options
#906:
For 1/8" glass only
Frame Only and Mullion doors come standard with retainer moulding groove.
(Regular Bead Shown Above)
Non-grooved is available. Simply specify "no rout for retainer moulding" in code portion of the order form.
(Regular Bead Shown Above)
Clear:
Standard for 1/8" glass only
#907:
For 1/4" glass only
#52:
For varying glass thickness.
Use on radius doors.
#83:
Similar to #52.
Used on TW - 10961, 209 Series, and Barcelona.
Frame Only Door
  • Most of our door styles are available with a frame only option to match your solid panel door designs.
  • Frame only doors are a perfect accent and can accommodate a wide array of decorative glass and wire mesh inserts.
  • When ordering specify door design, size of the door, and "Frame Only".
Mullion Door Options
Standard Lite Mullions
  • Specify 4-lite, 6-lite, 8-lite, 10-lite or 12-lite ordering.
  • All lites will be evenly spaced unless otherwise requested. Odd mullion configuration charges will apply if custom spacing is requested.
  • All standard 3/4" and 1" framing beads available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives. Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no retainer moulding" options available.
  • True divided lite option available.
9-Lite Offset Mullion
  • 9-lite mullion features 2" x 2" corner lites standard.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Odd mullion configuration upcharge applies.
  • True divided lite option available.
  • True divided lite option available.
11-Lite Offset Mullion
  • 11-lite mullion features 2" x 2" corner lites standard.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Odd mullion configuration upcharge applies.
  • True divided lite option available.
Odyssey Mullion
  • A six lite design with two mullion strips extending below horizontal mullion.
  • A dimensioned sketch must accompany each Odyssey mullion order.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Odd mullion configuration upcharge applies.
  • True divided lite option available.
Diamond Mullion
  • Features a 4" x 4" diamond lite centered left and right in opening and 4 1/2" from top rail. Diamond lites centered left and right in opening and 4 1/2" from top and bottom rails.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Diamond mullions will be quoted through Special Designs. Additional lead-time required.
Double Diamond Mullion
  • Double Diamond mullion features two 4" x 4 " Diamond lites centered left and right in opening and 4 1/2" from top and bottom rails.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Diamond mullions will be quoted through Special Designs. Additional lead-time required.
Arched Lite Mullion
Arched Mullion
  • Arched lite mullions feature seven radius lites.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular and Square Only.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Arch Lite mullions will be quoted through Special Designs. Additional lead-time required.
  • An AutoCad drawing will be faxed to the customer for approval prior to manufacturing.
Double Arched Lite Mullion
Double Arched Mullion
  • Double arched lite mullions feature 12 radius lites.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular and Square only.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Double Arch mullions will be quoted through Special Designs. Additional lead-time required.
  • An AutoCad drawing will be faxed to the customer for approval prior to manufacturing.
X Lite Mullion
X Mullion
  • Features diagonal mullion pattern.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • X-lite mullions will be quoted through Special Designs. Additional lead-time required.
  • An AutoCad drawing will be faxed to the customer for approval prior to manufacturing.
Panel and Frame Routs
G-012 Rout
G-056 Rout
1-1/2" spacing from center of groove to center of groove standard. Groove pattern begins at the center of panel.

Not available with 1/4" panels.

Custom spacing available.

1-1/2" spacing from center of groove to center of groove standard. Groove pattern begins at the center of panel.

Not available with 1/4" panels.

Custom spacing available.

G-121 Rout
G-015 Panel Groove Rout
Camelot Rout
1-1/2" spacing from center of groove to center of groove standard. Groove pattern begins at the center of panel.

Not available with 1/4" panels.

1/2", 3/4", or 1-1/2" spacing.

Available on all flat panel applications.

On 1/2" grooving base of groove is square.

Rout available on stiles only. Must be specified when ordering.

On designs with Cathedral top or bottom rails, rout is available on stiles only.

Cannot be used with applied moulding, Madison, miter designs or Presidential series.


Lazy Susan Doors

Appliance Panel and Wainscot Options
Appliance panel selection must be noted when ordering. See Offering and Availability information in the Wood Doors and Drawer Fronts content for appliance panel options and specific designs.

Apply Over Plywood and Glue-in Strips options will have the following margins unless otherwise specified.

  • Refrigerator panels – 1/2” margin on all sides.
  • Other appliance panels – 1 1/2” bottom margin and 1/2” on all sides.
  • Margins up to 3” available with glue in strip option.

We use a composite core plywood as a backer for its solid wood appliance panels.

For Apply Over Plywood and Glue-in Strip methods:

  • List overall size of panels when ordering. Specify required reveal/margin. Refer to the appliance manufacturer’s specifications for this information.
  • To see if the chosen door design can be manufactured as an appliance panels, refer to the Offering and Availability information in the Wood Doors and Drawer Fronts content.
Appliance Panels are used on the main surface areas of the appliance. For example, the door of the dishwasher would receive an appliance panel as shown at the top of the photo at left.

Insert Panels are used for smaller complimentary areas of the appliance, such as over access panels of a refrigerator or a dishwasher as shown at the bottom of the photo at left.

Appliance Panels
Glue-in Strip Profile
Apply Over Plywood Profile
Insert Panel Options
Insert Panel for Appliance Panel Edge Profile
Insert Panel for Glue-In Strips or
Apply Over Plywood Options
Wainscot Panel Options
Wainscoting is defined as a multiple panel door that is wooden and is used to line the walls of a room, or panels forming the lower part of an interior wall or cabinets when it is finished differently from the rest.
Our Wainscot Panels are available in most mortise and tenon designs. Generally they involve multiple panels, both in height and/or width.

Multiple panel doors have design charges equivalent to the number of panels ordered.

Mitered doors can be made as wainscot with multiple panels in most designs. Please contact our office for more information.

Oversized Mitered or Presidential doors will not be covered under warrantee.

Specifications follow the size restrictions per panel.

Doors ordered over 26" wide or 48" high will be made with two panels unless otherwise specified by the customer.

One panel will be added for every 26" wide or 48" high.

Example: A door measuring 27" x 49" will receive 4 panels.

We will not warranty oversize single panel doors against warpage that will develop. Customers can still order these items, but must waive the warranty in writing.

Maple Craft USA • P.O. Box 26 • Albion, Pa 16401
Local Phone: (814) 756-4997 • Local Fax: (814) 756-5640