Site Map
WE CATER TO CONTRACTORS!
Phone:
Fax:
800-756-8077
800-756-9077
MADE IN THE USA!
Great Products! Great Prices! Great Service!
Since 1960

Wood Mouldings for the Entire Home

Crown 1622 with 1-1/2" Egg and Dart Moulding
Crown 1621 with 1-1/2" Rope Moulding
Crown 1623 with 1 1/2" Dentil Moulding
We now provide one of the largest selections of cabinet and furniture grade mouldings which can be used in a wide variety of applications. Mouldings are available unfinished or prefinished to match cabinet doors and other wood component accessories.

Selection: 50+ Wood Cabinet Related Mouldings. Mouldings include Base, Batten, Casing, Crown, Corners, Cove, Dentil, Egg & Dart, Fluted, Frieze, Light Rail, Plain, Reeded, Rope, Scribe, and Trim. We also offer 5 veneer wrapped mouldings.

Wood Species: 13 different wood species. Species include Alder, White Ash, White Birch, Cherry, Hickory, Lyptus, Hard Maple, Soft Maple, Red Oak, White Oak, Paint Grade, Clear Pine, & Walnut. The following exceptions apply:

Crowns:
Crowns: 1621, 1622, 1623: Cherry, Hard Maple, Red Oak, Paint Grade only.

Specialty Mouldings:
Rope: 3/8" & 3/4": Cherry, Hard Maple, Red Oak only
Rope: 1 1/2" & 2": Alder, Cherry, Hard Maple, Red Oak only
Egg & Dart, & Dentil (all sizes): Cherry, Hard Maple, Red Oak only
Plain, Fluted, & Reeded (all sizes): Alder, Cherry, Hard Maple, Red Oak only
Veneer Wrapped Mouldings (all): Cherry, Hard Maple, Red Oak only

Decorative Mouldings:
Grape Crown & Pierced Ananthus: Cherry, Maple only

Sizes: 8-ft. Choice Grade Solid Wood Moulding & 9-ft. Veneer Wrapped Moulding.

Solid Wood Moulding Specifications: Natural species characteristics that exhibit the character and beauty of wood will be evident on mouldings. These characteristics will include, but not be limited to: color variations, heartwood, sapwood, knots, splits, worm holes, and checks. Our specifications do not allow these characteristics to affect structural integrity of the mouldings.

Natural characteristics that become evident through machining, environmental, or atmospheric conditions such as minor bows, twists, and crooks may be evident but will not affect product quality, or impede workability. Machining marks may be evident, but will not affect structural integrity. 3 1/2" or larger profile mouldings may have at least one glue joint running the length of the piece.

Mouldings may be prefinished to match the rest of your order. This includes specialty finishings. We finish both the face and back of the mouldings.

Eight foot stock and custom pieces will be shipped 94” to 97” in length.

Solid wood mouldings are available in two grades: “Prime” and “Choice”, as specified below. Mouldings are classified differently than our door / drawer fronts wood grading of Premium, Standard, or Value grade. Moulding grades refer to the usability of the lumber.

Choice – This is our highest grade of mouldings. Each piece will exhibit similar material quality characteristics on the face of the moulding that offer on our standard grade doors. Ends will be trimmed. Depending on profile depth, sap may appear on the moulding face.

Prime – These pieces may contain a limited amount of defects and color variation admitted in the established rules of the National Hardwood Lumber Association® for this grade. 8 foot lengths of material will be approximately 80% defect free. Pieces under 8 feet will be approximately 90% defect free. Defect locations will vary.

Moulding Assembly Options:

We will pre-assemble mouldings to provide a cost effective alternative to installing mounting cleats and decorative accessory mouldings. Assembled mouldings can also be prefinished to match the rest of your order.

Mounting Plate Installation Option:

The Mounting Plate Installation option allows the 384 and 470 mouldings plates to be pre-applied to select crown and light rail mouldings.

Eligible profiles include 342, 343, 344, 1621, 1622, & 1623 Crowns, 345 Reversible Frieze and 1448 Light Rail.

In order to designate “Mounting Plate Installation” on your order form next to each piece of moulding to be preassembled.

Finishing option is available for preassembled mouldings.

Decorative Moulding Assembly Option:

The Decorative Moulding Assembly option allows customers to order select crown mouldings with accessory mouldings preassembled.

342, 343, and 344 Crown mouldings can be combined with 7/8” Dentil, 1” Egg & Dart, and 3/4"Rope mouldings.

1621, 1622, and 1623 Crown mouldings can be combined with the 1 1/2" Dentil, Egg & Dart, and Rope decorative mouldings.

To order designate “Decorative Moulding Assembly” next to each piece of moulding to be preassembled.

Finishing option is available for preassembled decorative mouldings.

Some mouldings are available in pre-assembled.

How to Order Wood Mouldings:

1. Print and complete our Wood Cabinet Mouldings Order/Quote Form as you view the information below.

2. Select a Wood Species. Choose from 13 different wood species including Alder, White Ash, White Birch, Cherry, Hickory, Lyptus, Hard Maple, Soft Maple, Red Oack, White Oak, PAint Grade, Clear Pine, & Walnut. Note exceptions listed above, under Wood Species. These mouldings are a great addition to orders for wood cabinet doors and other wood accessories offered on our web site.

3. Choose from the following Moulding Designs (starting below):

4. Select Finishing Options. We are now able to offer prefinished wood mouldings to match wood cabinet doors, veneers, valances, fillers, and more. Visit Wood Cabinet Doors to select your custom finish.

Crown Mouldings and Mounting Plate
* Crown Mouldings 342, 343, and 344 will accomodate Mounting Plate 384 (shown below) and 3/4" Rope, 7/8" Dentil, and 1" Egg & Dart mouldings.
Crown mouldings 1621 and 1622 will accommodate Mounting Plate 384 (shown below) and 1 1/2" Rope, Dentil, and Egg & Dart mouldings.
Coves, Outside Corner and Batten Mouldings

(Drawings not necessarily to scale)

Beaded Panels and Reversible Friezes

(Drawings not necessarily to scale)

Scribe and Base Mouldings

(Drawings not necessarily to scale)

Light Rails, Arts & Crafts, and Mounting Plate

(Drawings not necessarily to scale)

Beaded Trim and Colonial Casing

(Drawings not necessarily to scale)

Rope and Egg & Dart Moulding

(Drawings not necessarily to scale)

Dentil and Plain Moulding

(Drawings not necessarily to scale)

Fluted and Reeded Mouldings

(Drawings not necessarily to scale)

9-ft. Veneer Wrapped Mouldings

(Drawings not necessarily to scale)

Decorative Mouldings

(Drawings not necessarily to scale)

Maple Craft USA • P.O. Box 26 • Albion, Pa 16401
Local Phone: (814) 756-4997 • Local Fax: (814) 756-5640